← Back to AdhesiveZone
Which Adhesive for Which Tile and Surface?
Pick your job to see the right adhesive spec and matching products.
Laying vitrified tiles directly over old tile without the right adhesive often leads to a hollow sound, cracked grout lines, or tiles lifting within a year.
Read the guide →Ceramic tiles on a freshly plastered wall sometimes debond months later if the plaster was still curing or dusty when tiled.
Read the guide →Marble and granite can stain or discolour with the wrong adhesive, and a standard tile adhesive often doesn't grip heavy stone slabs well on concrete.
Read the guide →Large-format tiles on a plywood or wooden substrate are prone to cracking, since wood flexes and moves far more than concrete.
Read the guide →Mosaic sheets in a bathroom or wet area can fail quickly if the adhesive used over the waterproofing membrane isn't itself water-resistant.
Read the guide →Tiles on an exterior wall face constant heating and cooling, which expands and contracts the substrate — a rigid adhesive cracks under that movement.
Read the guide →Pool tiles need to withstand permanent water immersion and chemical exposure — a cementitious adhesive will eventually break down.
Read the guide →Glass mosaics are translucent, so a poor-quality or discoloured adhesive can show through, and drywall needs a lighter, flexible bedding.
Read the guide →Re-laying marble over old marble or a polished stone floor often fails because the old surface is too smooth and non-porous for a standard adhesive to grip.
Read the guide →Large vitrified tiles on a vertical wall can slip down ("sag") before the adhesive sets if it doesn't have enough initial grab.
Read the guide →